Networking:
1. You will first need to create a shared folder on your server with read/write permissions. Copy the path of this address to enter into the monitor.
2. If your monitor has Wifi capabilities, confirm the antenna is on the back of the monitor. If it does not, you can hard wire by connecting an ethernet cable to the back of the monitor.
3. You will then need to close the software on your LifeWindow monitor. Click on System, Patient Management, Admit New Patient and name the patient LW CLOSE (All caps and space between the W and C) and enter 5967 for the password and click on admit patient and start monitoring.
4. Once the software has been closed, you will see an Enable Safeboot screen. Once here, click on Desktop and confirm your internet connection.
5. Next, click on Map Drive and enter the path to the shared folder or browse for it.
6. **Make sure to check both boxes for 'reconnect at logon' and 'connect using different credentials'.
7. Enter administrator credentials and check the box to save at reconnect.
8. Click Ok when drive is mapped and Enable Safeboot.
When you are ready to save patient data for the first time:
1. Click on System, Save Patient Vital Signs Report. In this box you will need to click on Select Another Directory and choose your mapped drive then save file.
Last Modified: 04/22/2019